Skip to main content

Tutorials (sorry, again)

A work project was postponed and I had no sewing mojo (too hot the last couple of days, but raining now). I invested some time in setting up a new blog! It's still under construction, but if you're interested in tutorials, please visit the Sewing tutorials blog. As you can read there I gather sewing links on that blog. Try the embellishment category for how it's going to look.

From now on I will take a bit of time daily (inspired by Paula's 30 minute a day project) to add the links that are now in my sidebar.

Comments

  1. That's a great idea! Thanks for going to the time and trouble to do this.

    ReplyDelete
  2. Thanks so much for all your hard work!

    ReplyDelete
  3. Great idea! Thanks for doing this.

    ReplyDelete
  4. Wow! Sigrid, that is going to be AMAZING! That is so cool, you rock!

    ReplyDelete
  5. Sigrid,good idea. Ahhh. thanks for the tip of Burda. He looked and drawings are incredible. I remember my aunt to sew these models when I was a kid. greetings. Paco

    ReplyDelete

Post a Comment

It's always nice to have feedback on what I'm posting about. All comments, also positive criticism, are always highly appreciated.
Leuk als je een berichtje schrijft, altijd leuk om te lezen, ook opbouwende kritiek!

Popular posts from this blog

How to sew a sleeveless top with facings

How lovely to read the nice comments on my jacket. Grumpy without coffee commented that the original artist for the cartoon (which apparently was for books) was Sarah Andersen. Thank you for mentioning it. Beckster asked about the way I closed the center back seam of the lining. I did it by machine. She also said “Although I have not tried it, I have been told that the lining can be made by using the pattern minus the seam allowance and facings.” Well, certainly not without seam allowances, it should be without hem and without the facings. Important is that you have about 5 cm hem in the jacket for this to work. And I would always make a center back pleat. It gives you space to move without the lining pulling on the fabric. Next time I make a jacket I will try to make photos of the process of bagging the lining (Patsijean said she would have liked to see them and probably more would be interested). Might take a while though, see the end of this post.-----------------------------I mad…

Dress Burda June 2018, construction picture

Once in a while a pattern shows up in a magazine that I want to make immediately. This Burda dress from the June issue is one of those.It’s mainly the linedrawing that’s interesting, as the fabric they used for the magazine issue is not really showing the design lines. There would have been better accent options for the piping they uses. If you’re like me and in general don’t look at the Burda instructions but do it by experience or your way anyhow, DON’T go on autopilot with this one. Sleeveless dress: I close shoulder seams at the last possible moment. Not here, as you have to sew the bias band in between the center and side parts. The band has no seam (and I wouldn’t add one, too many layers of fabric), so the shoulder has to be sewn earlier than I’m used to.Darts: I was inclined to sew all darts as first step and realised really just in time that the front dart is taking up the edge of the band. Front and back band! I was stupified why the angle of the band was not matching the si…

Hilarious description

This week I bought the January Burda issue and browsing through it this top, and especially its description had my attention. Written by someone who has no understanding of modern, functional fabrics and never goes to the gym. Don’t know whether it’s the same in the English issue of the magazine, but in Dutch it says “Sport shirts often have the disadvantage to be close fitted.  This restricts your movement. Our suggestion: make this shirt with a full draped back.“I didn’t care to check their description of sports shirts they published before, but thought this one was hilarious.Off to trace a pattern from this magazine (not this one).