Saturday, June 18, 2016

Zipper and pocket insertion

The next step is inserting the zipper and the pocket. There are other ways of doing this, but this is what works for me. I did not make pattern pieces for the pocket, I seldom do for jacket pockets and go with pieces of fabric that are large enough and cut them in shape during the process.

First step was basting the zipper into the window and stitch at the edges to sew the zipper in.

DSC_0358

DSC_0362

The zipper after stitching and removing the basting threads.

DSC_0363

How it looks on the inside.

DSC_0366

For the part of the pocket that is attached to the lower zipper tape (never visible) I chose a cotton fabric that I sewed onto the zipper tape.

DSC_0370

DSC_0369

Pressed downward

DSC_0371

The fabric that is attached to the top zipper tape is the fashion fabric, it will be visible when opening the zipper.

DSC_0372

Now I pinned the pocket lines to the two rectangles of fabric

DSC_0374

Stitched, cut in shape and the edges zigzagged

DSC_0378

A peek into the pocket. The fabric of the inner pocket is nog on the same grain as the jacket itself. To me that is of no importance, the pocket will not be open normally and it only serves the impression you get of the same fabric when you do open the pocket. For once I just don’t mind.

DSC_0377

With so many pictures this might look as a lot of work, but actually it isn’t complicated and it took me 45 minutes (looking at the time of the first photo and the last).

One tip if you do this: work both pockets at the same time. Don’t do the first one and then the other. It will make sure both pockets/zippers are as identical as they can be. I always try to do that when there’s more than one of the same thing to sew (sleeves, cups for a bra, shoulder straps etc.)

Friday, June 17, 2016

Pocket window

The other night I looked at the front panels that were pinned to the dressform and thought something is not quite right with the pocket placement. I had traced a line on a diagonal but when I saw the basting lines I decided I wanted them to be higher center front and lower at the side. Luckily it was not too late to change it. I removed the extra layer of interfacing for the pocket carefully and added a new piece.

I’m using a technique that makes a ‘window’ for the zipper. The perfect fabric to use for the window is silk organza, as it’s thin but sturdy and super bonus is that you can see through it. I couldn’t live without a silk organza press cloth any more for that reason.

A rectangle sufficiently wide and long is cut and placed on the right side of the fabric. As I want this to look very good (it’s an eyecatcher of this jacket) I baste a lot at this stage. The outer basting stitches are not the stitch lines, just basting lines to keep the organza in place while stitching.

DSC_0346

I stitched on both sides of the center basting line (above picture), making very short stitches at the corner. The center basting line was already removed in the picture below and you can see the remnants of the interfacing for the first pocket placement.

DSC_0348

DSC_0350

With sharp scissors the opening is cut, with long triangles at the end. Cutting exactly to the corner, but not in the stitchline!
Perhaps you can see the pink chalk mark that I made for the stitching line. The width was not decided by eyeballing it but by measuring and making a sample.

DSC_0352

DSC_0353

The silk organza is folded to the inside, favouring the jacket fabric a little so that the organza is not visible from the right side.

DSC_0356

And again: pressed and basted in place.

DSC_0355

Ready for zipper and pocket insertion.

Thursday, June 16, 2016

Interfacing the body–part 2

First and foremost, thank you so much for all the comments indicating that a lot of my readers like to see the details of construction. The teacher in me likes to share and document the process, but if it’s not of interest to anyone I’d better use my time sewing Winking smile. I have my times in and out of blogging, which I now regard as something natural. In the early years of blogging I used to feel I “had” to post. That feeling has gone, it’s one of the things I do and like doing very much, but there are times it’s just not a priority and I’m fine with that too.

Onwards to the jacket. I’ve added extra interfacing at the point where the pockets are to be set in and  added a strip to the neckline and center front. (the seam needs an extra pressing)

DSC_0334

I know this pattern fits and I’ve added 1cm (3/8 inch) seam allowances. After applying the interfacing I marked a few crucial spots with carbon tracing paper: start/finish of front zipper insertion, waistline and of course the pocket line. The last one was hardly visible after applying the extra layer of interfacing and I traced it with a pencil and basted the line so it’s visible it at the front.

DSC_0337

The tape I used at the neckline and center front is “off grain tape”. I bought this in the UK at the English Couture Company when I did a class there. It’s exactly what it says, off grain, not on the bias. It means it has a little stretch, perfect for a slight curve but also giving stability on the straight parts. It’s also very easy to replace it with a strip of interfacing that’s on grain, which is what Alison Smith does in her Craftsy class. Then you just clip the tape where needed. I’ll probably do that on my next jacket, as this was the last I had.

DSC_0331

In her Craftsy class Alison Smith also uses the strip of interfacing at the shoulder seam and armhole. I won’t do that in this jacket probably (still debating).

LindaC asked which fabric this is. I don’t know the exact content of it. It was the last bit on the bolt and it didn’t mention the content. I thought it had a bit of silk in it but the shop owner said it was viscose (rayon) with some other fiber. Whatever it is, it has a lovely texture and shine and is easy to work with.

Tuesday, June 14, 2016

My favorite type of garment to sew

Jackets are the type of garment I love to sew most. By far. I love the whole process of planning, cutting, interfacing and construction. In general it’s a time consuming process, but cut in several stages it’s very manageable.

The inspiration for my next jacket was one I saw in a television broadcast. I tried to find a picture but could not find it. It is a jacket with V-neckline, 3/4 length sleeves, a zipper center front and also the pockets will have a zipper. In the category jackets it’s relatively easy (compared to a notched collar for example)

The first step was to draft the pattern. I based the pattern on the jacket I made last year and made a quick muslin of the body because I wanted to be sure the V was drafted correctly. With a deeper V-neckline the pattern has to be adjusted to make sure there is no gaping.

DSC_0324

No need to be worried, the fit is good. I didn’t muslin the sleeves, I know they are ok because they are exactly the same as in the other jacket. Only difference is the 3/4 length on this summer jacket.

A detail shot of the fabric used.

DSC_0330

Front pieces have been assembled. I’m waiting for the zippers to arrive, then I can construct the pockets.

DSC_0329

A peek on the wrong side. All pieces for the body were interfaced with a light weight interfacing. The upper part of the back is interfaced with a more heavy weight interfacing.

DSC_0328

The front has a so called shoulder placket. This is made in two layers, as instructed by Alison Smith in her Craftsy class Structure & Shape. A course (and the total series) I heartily recommend when you’re interested in jacket construction.

The first layer is hair canvas, cut on the bias.

DSC_0325

This is attached with fusible interfacing which extends at the shoulder and armhole. In this way the canvas is attached, but still moving freely at the bottom.

DSC_0327

Next step is a strip of interfacing at the edge.

Do you like to read this detailed information? In the discussion about blogging versus instagram/facebook etc. that is going on now I’m definitely in the “I keep with blogging” camp, having neither an instagram or facebook account, so I don’t even know what I’m missing.
I’m wondering though whether it’s still interesting to read the detailed posts about construction. Would you prefer to only see the finished garment?

Monday, June 13, 2016

Finished bra

A nice finish is in the details.
DSC_0313
Can you see the dart in the band? Probably because you know it’s there.
DSC_0315
The pattern is the Isabelle from Sewy again, using a non-elastic lace (last time I used a lace with some stretch). Because of the non-eIastic lace I added a little to the upper cup pattern piece and even made a left and right pattern piece because of a small size difference. This is not really an issue when I use lace with some stretch, but in non stretch lace it’s obvious, resulting in a little ‘overflowing”. You get my drift I presume. It’s a problem I have with a couple of previously made bras too, so obviously something has changed and I have to adapt my patterns.
This bra is wearable, but I want to make it again with a few changes as I’m not completely satisfied. The added space is not quite enough and I think it would be good if the center front is a bit higher. I bought a couple of different wire sizes to experiment with. Difficult to show as for obvious reasons I don’t want to share pictures of the fitting issues on the blog.
A project for the near future, first a couple of other projects to finish.

Thursday, June 9, 2016

Scallop edge–applying elastic

In my previous post I showed you how I used a tiny dart to get the scallop edge of lace to match the underband of the bra. Or at least, the main center part of it.

This means that elastic can’t be used as you would normally do, as now you can’t turn the elastic under the edge of the lace.

A picture of how it looks when finished:

DSC_0312

First the elastic is attached to one side panel, the length of the center part is left open and the elastic attached to the other side panel. When turned the elastic is only topstitched at the center front.

The steps in pictures:

The side panel is attached to the front, making sure there’s space for the elastic to attach.

DSC_0302

The inside, the lace panel is underlined with non-stretch tule. The side panel is a double layer. The tule used has some stretch. I use this because my lycra has a lot of stretch and does not give enough support when used as a single layer.

DSC_0303

The picot elastic is attached with a zigzag stitch, meeting the edge with the lace exactly.

DSC_0306

DSC_0307

Measure the length of elastic you need for the center panel and mark the center front and end with a pin. (I used to take off 15-20% of the length of the pattern piece, but nowadays I just stretch the elastic and eyeball it)

Attach the elastic to the other side panel, take care not to turn it over in the center.

Turn the elastic, pin the elastic to the center front, just hiding the picot edge under the lace and topstitch with (triple) zigzag. In this case I would really prefer the triple zigzag as it’s wider and covering more of the width of the elastic. The result is as shown in the first picture. Below you can see that the center front elastic is only sewn with the triple zigzag.

DSC_0310

DSC_0309

Thursday, June 2, 2016

A very tiny dart

 

DSC_0299

One of the projects I’m working on is a new lingerie set. I wanted the scallop edge of the lace on the bottom edge. However, the bottom edge of the pattern is curved. I have posted how I do this before, but it’s many years ago (blogging for over nine years now!). So not too bad to post about it again.

This is the pattern piece, including seam allowances (a bit irregular as I traced this on sturdier paper for the pictures).

DSC_0292

If you want to use the scallop edge at the bottom, the seam allowance must be removed.

DSC_0293

Position the center front where you want it. I always use a deep point of the scallop. Also keep in mind how the center front will look like when sewn together. At the center it’s deciding where to have a little extra, imagine a straight line till the bottom of the curve of the pattern.

image

I clip the pattern to the edge and leave just a hinge. The right part is then moved down to meet the scallop edge, creating a tiny dart. That dart is marked and sewn, resulting in what you see in the first picture. After the cups and channelling are inserted, the dart will hardly be visible.

DSC_0301

In another post: how to add the elastic to the bottom edge when using this construction.