Skip to main content

Burda archive

I missed the Burda archives since they changed the sites to Burdastyle.
Accidentally I found the archives still exist on the French site and contain the archives from mid 2007 till today! Here's the link.
For as long as it's valid.

Comments

  1. My goodness how did this slip by me? thank you.

    Rose in SV

    ReplyDelete
  2. I also found this through a blog or pattern review and it goes back to 2001:
    http://translate.google.com/translate?u=http%3A%2F%2Fwww.osinka.ru%2FZhurnaly%2F&sl=ru&tl=en&hl=&ie=UTF-8

    ReplyDelete
  3. Thanks Sigrid! Hope it stays connected :)

    ReplyDelete
  4. I understand the French archives are being phased out.. However check out this post http://straightjacketmuse.blogspot.fr/2012/04/burda-archives-redux.html I find that translate.google.com works really well to help navigate those :-). May they stay up forever!

    ReplyDelete
  5. Thank you Sigrid.
    The Burda site is a maze at best. We must divide, conquer and share this information!

    ReplyDelete

Post a Comment

Comments are very much appreciated! I read all of them, try to answer the questions but don't always have time to react to comments.

Popular posts from this blog

How to sew a sleeveless top with facings

Edit to make this post only about the technique, not my ramblings on other subjects.
This is about making a sleeveless cowl neck top with a facing for both the front and the back. In this way no special finishing of the arm holes is needed. This method is based on Carolyn’s way of making a top with all seams enclosed.



Let me show you how to do this. It’s a good reminder for myself too, I forget when I haven’t done it in a while.
First you need a pattern that has a facing for the back that extends below the armhole. Also the front facing has to extend below the armhole. Easy enough to adapt a pattern, just trace a line about 5 cm (2 inches) below the armhole. The photo below shows you the facing of the back

Step 1: stabilize the back neckline of the back pattern piece

Step 2: with right sides together, sew the neckline of the back and the back facing, press but do not topstitch

Step 3: With right sides together, sew the armhole of the front to the armhole of the front facing.

Step 4:…

Dress Burda June 2018, construction picture

Once in a while a pattern shows up in a magazine that I want to make immediately. This Burda dress from the June issue is one of those.

It’s mainly the linedrawing that’s interesting, as the fabric they used for the magazine issue is not really showing the design lines. There would have been better accent options for the piping they uses.
If you’re like me and in general don’t look at the Burda instructions but do it by experience or your way anyhow, DON’T go on autopilot with this one.
Sleeveless dress: I close shoulder seams at the last possible moment. Not here, as you have to sew the bias band in between the center and side parts. The band has no seam (and I wouldn’t add one, too many layers of fabric), so the shoulder has to be sewn earlier than I’m used to.
Darts: I was inclined to sew all darts as first step and realised really just in time that the front dart is taking up the edge of the band. Front and back band! I was stupified why the angle of the band was not matching th…

Hilarious description

This week I bought the January Burda issue and browsing through it this top, and especially its description had my attention. Written by someone who has no understanding of modern, functional fabrics and never goes to the gym. Don’t know whether it’s the same in the English issue of the magazine, but in Dutch it says “Sport shirts often have the disadvantage to be close fitted.  This restricts your movement. Our suggestion: make this shirt with a full draped back.“I didn’t care to check their description of sports shirts they published before, but thought this one was hilarious.Off to trace a pattern from this magazine (not this one).