Wednesday, June 6, 2007

Editing blog

Normally I try not to spend my Wednesday afternoons at the computer. My son is still free on Wednesday afternoons (which is normal here for children up to 12) and I try to be available. But as he was outside playing with friends the problem of the layout of this blog nagged at me.
As I am an Office-programmer by profession, I do have knowledge of computer languages. But I do not have a lot of experience with html yet.
But by changing step by step and previewing each step, I managed and am happy with the result so far. There are a few other changes that I'd like to make, but that will be some other day.

Tuesday, June 5, 2007

Editing in progress

This time this is not editing patterns, but the layout of my blog. I've tried this before, but inspired by Nancy from Encue Creations I'm now working on a wider layout for the text. Takes a bit of time, so if you see a bit of a mess now: I'm working on it.

Sunday, June 3, 2007

3 baskets

For some time now I restrict myself by having 3 baskets for my sewing work. It means that I don't have more than 3 projects that I'm working on at the same time. For me, this works rather well.
At the moment in my baskets:
1. A few panties for my daughter, to go with the bra's I made her of the fabric of my post 2 weeks ago.
2. Dark blue capri pants. Made of linen I bought and washed yesterday. For these I will use a TNT pants pattern, that's been used now for 2 years and I have simply cut shorter.
3. Dotted black fabric for a top, as shown in one of my first posts. This is the picture of the pattern I have in mind. It is a Burda pattern.


This is a challenging project because of the fitting issues I have on this kind of front.
Thus I made a muslin this afternoon, after changing the pattern. Earlier this year I made a Burda top with a knotted front (review here), which I now have put away as not wearable. I keep tucking at the seam to prevent it from creeping up all the time. Just don't feel comfortable.
But I think I found the reason for this too: the length of the upper front part is not long enough to go over my D-cup breast. After taking my measurements accurately and comparing them to the pattern I changed the pattern as shown below.


I cut the pattern to the bust point (determined by tissue fitting before the mirror) a couple of times and moved the pieces down to create space. This meant extra space at the bottom, which I corrected with a dart.

Very good I decided to make a muslin, the result was not very satisfactory.





On my left side is the result as it was after the changes above. Not very flattering. On my right side I pinned away a lot of space (approx. 6 cm) from the lower front part. This looks a lot better, but I'm not yet convinced that I will use this pattern.

I do have some time to think about it, there will not be a lot of sewing the next few days, the 15 minutes here and there will be spent on my capri pants.



Saturday, June 2, 2007

Making a bra - 5 (finishing)

Edited to add: I've made a pdf file for these instructions. You can find it here.

Before adding the shoulderstrap, you should measure your closing at center back. The shoulderstrap should be within the closing. In the picture I've marked it with the line. So I needed to trim it a little bit. When your hook and eye closure is wider than the back, you pin your shoulderstrap a bit out of the fabric.



Cut your shoulderstraps in half. Don't cut a separate piece for the back, leave it as one part.
Pin the shoulderband to the back and stitch it with your widest zigzag.



Trim the fabric on the inside.


Take the ring and pin it. Sew with a narrow zigzag and very close stitches. I made two rows of zigzag stitches, to make it more secure.


Cut off the shoulderstrap, you now have the strap that you will attach to the cup.

In the same way, with small zigzag stitches, attach the shoulderstrap to the slider.


Slide the shoulderstrap through the ring, from the back to the front, and then through the slider.


Pin it to the cup


Stitch, again using small zigzag stitches.


Close the wire casing on both sides with narrow zigzag stitches too, and cut off the extra length that is sticking out still.

The bra is finished, add a ribbon decoration if you like.



I really hope that this tutorial is helpful to some of you. Any comments are welcome. I tried hard to have all the English bra vocabulary correct by searching these on the internet, but please let me know in the comments or by e-mail if I have made a (stupid) mistake or if I could make it clearer by using another word.

Making a bra - 4

Edited to add: I've made a pdf file for these instructions. You can find it here.

In my last post, the bra was getting shape. Now it comes to finishing it. This is the part that takes the most time.

Wire casing/chanellingThe bra I'm making has wires. For that you need wire casing. You measure the size of the rounding of your cup (seamline!) and cut 1 cm extra for seam allowance and on both sides some extra length. On the picture below you see my wire casing, on the right the extra 1cm seam allowance is measured. This side goes under your arm. The other side is center front.
Wires are usually 2 cm shorter then the rounding of your cup (you have to stitch above them later to ensure they don't move out of the casing.



Pinning wire casing

Pin the wire casing on the stitched line of the cup. In my bra the wire casing is folded outward, so the seam allowance is folded under the casing like the picture. It could be the other way when your pattern folds the channelling towards the cup.


Stitch the wire casing on the edge, very close to the seamline of cup and band.


Don't stitch the last two centimeters of the wire casing under the arm. The elastic has to be folded on this part


Casing in the picture below is stitched.Just let the extra length attached for this moment. Certainly in center front my experience is that it is best to trim it later, as the topstitching still has to be done.


Measure elasticCut the length of the elastic for bottom and upper part of band and cup. Either mark the points with pins or with a erasable marker. The length is usually the length of the pattern parts -20%. but there are women who find this too much and take 15% off.

Pin elastic to underside of band and center frontI use a ironing ham to keep the lycra stretched while I pin. But an extra pair of hands works too. Another method is stitching the beginning stitched, and keep the needle down in the elastic and pin from there.

Sew the elastic with a zigzag stitch, trim the seam allowance, turn and topstitch with a multiple zigzag.


Important on sewing a bra is reducing bulk. In the following picture I have cut away a small part of the seam allowance of the seam of band and cup.


Now trim the seam allowance of the wire casing, and pin the wire casing from the front. Then edgestitch on the side of the cup, and then topstitch approx. 0,5 cm from the edgestitching. Be aware that in the space between edge- and topstitch the wire is added. So don't make it to narrow. This is tricky, even after making a lot of bra's, I regularly find myself ripping out the outer topstitching, because my wire won't pass :-(


Add the wires to the wire casing.


All that is left to do is adding hook and eye closing and the shoulderstraps.

Link to part 5

Thursday, May 31, 2007

Making a bra - 3

Edited to add: I've made a pdf file for these instructions. You can find it here.

The next part of my tutorial of making a bra. Meanwhile I'm thinking of my next garment to make, other then lingerie. Difficult choice, but I would like something with a bit of a challenge. On the other hand, I need some capris or shorts for the summer. Well, that's for next week.

Making the cups of the bra.

Sew narrow elastic with a zigzag stitch to the scalopped edge of the lace. The elastic should be approximately 10% shorter then the seam. This also applies when you use non-stretch elastic. This narrow elastic will make sure that the cup lies to your breast properly.
Of course there is a difference in using stretch or non-stretch lace. If your lace has a lot of stretch, it will more easily take shape. I find it a matter of personal preference but have used both kind of lace. I tend to add 0,5 cm to the length of the upper cup when using non-stretch lace.


Sew upper and lower cup together with the 1 cm seam allowance.


Topstitch from the right side, using your fingers to mould the seam and make sure that the seam allowances stay in place. Like before, I use my blindstitch foot for this.
In a fabric combination as this, I fold both seam allowances to the lower cup. When your upper cup is lycra too, or stable lace, then you open the seam allowances and topstitch on both sides of the seam.


Now you trim the seam allowance on the inside very near the topstitching. This will give your cup a smooth curve.


The cup is now finished




Sew the cup to the center front and band with 1 cm seam allowance. If you have a pucker, like I had in this picture, open up a few stitches and make sure everything is inserted neatly. A few wrinkles that you can easily flatten with your fingers is normal, and nothing to worry about. In my picture you see that at the bottom of the cup, where the center front piece and band meet.


The bra is getting shape.



Link to part 4

Wednesday, May 30, 2007

Making a bra - 2

Cutting and preparing undercup

Edited to add: I've made a pdf file for these instructions. You can find it here.
All pieces are cut with a 1 cm seam allowance, with the exception of the upper cup, that is cut to the scallop of the lace (see my earlier post on cutting lace).
Look carefully on the patternpieces how to layout the pieces on the lycra. Patterns have a line to lay them in stretch direction. Always check to which side the lycra has the most stretch.

Lower cup
The undercup is cut a bit larger then the paper pattern. This is because I use fusible interfacing for the lower cup. The ironing of this to the lycra could mean that the part shrinks a little, so I cut my lower cup after interfacing.
Needing a D-cup the interfacing is extra support that I find very comfortable. For a size A or B this is not necessary.



Apply interfacing

The lycra is on a piece of pattern paper, right side down. Then the interfacing laid on top, then again a layer of pattern paper.


Iron

Then iron the interfacing to the cup with your iron on the paper. This will prevent curling the interfacing and adhesive parts on your ironing board. While sewing lingerie, this is the only point I use an iron.


Finished cutting

These are all the parts of the bra, including the strenghtening tule for the center (behind the piece in lycra).

Assembling center and band

Sew the center piece in lycra with the right side to the tule, with a small straight stitch.


Lay it down like this picture, and stitch just below the original stitching on the tule (believe this is called understitching) This prevents the tule from turning to the right side.


Trim the seam allowance, turn and topstitch.

Stitch the tule to the center pieces with large stitches.
Not necessary to do this very accurately, later on it will all be trimmed. For now it will hold the pieces together.


Sew the band to the center piece



Open the seams and topstitch near the seamline. I use my blindstitch foot for this, which works very accurately (do this with almost all my topstitching btw).


Center en bands are now ready.


This was a very long post. Hope this is helpful. To be continued (my bra is already a bit further, and I already took pictures). But this is enough posting for one day.

Link to part 3