Skip to main content

About t-shirts and hemming with coverstitch

Pictures of the finished skirt have to wait. I want to hem my skirt with “steam a seam” tape but forgot to buy it and as most of my fabrics and notions are in storage, I had none available at all. So I spent my weekend sewing two t-shirts. The pattern is the Ann T-top from StyleArc:

image

I’ve made this pattern several times now and it’s a great basic. After the initial one last year (never blogged about as far as I remember) I removed the gathers in the front by folding up at waist level.

Until recently I used an old Ottobre pattern from 2007 as my base for t-shirts, which is still a great pattern. But, as you can guess, it’s in storage (by accident though).

Black and white top

Blue graphic

The neckline and hems of both t-shirts were finished with a coverstitch.

finished hem

I’ve had a love/hate relationship with my Janome coverstitch for quite a long time, but have become used to it and now it’s taken out and used regularly. For a long time I did not use it properly either and on the inside you could see the edge of the hem stick out above the stitches.  Recently I saw a tip about how to make the finishing on the inside neat. Looks good doesn’t it?

inside hem

What I did was

  • Measure and press the hem at an exact distance (a sewing gauge will help)
  • Baste the hem at the very edge of the hem. I preferred hand basting but the tip I saw used long, straight machine stitches. I found those more difficult to remove afterwards when I made a sample.
    basted hem
  • Stitch while guiding your foot over the basted line
    topstitching
  • Carefully remove the basting thread.

I did this both for the hem of the body as for the sleeves and it works like a charm. It might be a bit more work, but the result is much better.

Comments

  1. I must try this hemming method with my cover-stitch, the end result looks very neat!
    I've just hemmed my V1465 skirt with steam-a-seam. Works like a charm.

    ReplyDelete
  2. Lovely tops - and well done for persevering with your machine. I got a Janome Coverstitch a year or so ago - and I'm afraid that I don't love it. My sewing machine and serger are like extensions of my hands - but not the Coverstitch. Sigh. I may have to get to know it better as it is a rather expensive 'brick' 😔

    ReplyDelete
  3. Oh, thanks for the tip... I avoid my coverstitch but this is a great tip and as usual one that is so obvious but not until someone tells you!

    ReplyDelete
  4. Good that you found sewing projects - great t-shirts. I remember how hard it was to have all my supplies stored away during the moving process. I hope it doesn't take too long before you can unpack and settle in!

    ReplyDelete
  5. I don't have a coverstitch (on my wish list, though) - but I have used this method for twin needle stitching on my sewing machine. I serge the edge of the hem, then press up and hand baste (I agree, hand basting is easier to remove) then guide the twin needle with the basting in the center. End result really looks like a coverstitch. - Heather

    ReplyDelete
  6. I've had the same issue. I took a serging class with Angela Wolf (it wasn't great and I didn't finish) and she would have you sew below the cut edge and trim afterwards. PITA. I would rather hand baste any day. Very nice tee shirts and I will be using this on my next tee shirt.

    ReplyDelete
  7. Love your tops. Thanks for the tutorial on coverstitch. I have the same machine and have a love/hate relationship with it. I have gotten better with it but like the idea of basting the hem and then stitching with it. Will have to give this a try.

    ReplyDelete
  8. You could even avoid unpicking the basting stitches! If you use a water soluble basting thread. Yes, that does exist!

    ReplyDelete
  9. Good tip. I'm considering purchasing a cover stitch machine because I find my twin needle hems often break after a washes.

    ReplyDelete
  10. I always use a double sided tape (SewKeyes has it in different widths - I'm not connected to SewKeyes at all so have no reason to promote just be clear :) ) and find that works perfectly for hemming with my coverstitch. It presses the hem into position and just following a guide on the side it comes out perfect every time. I mention it because it is much faster if you're crimped for time.

    ReplyDelete

Post a Comment

It's always nice to have feedback on what I'm posting about. All comments, also positive criticism, are always highly appreciated.
Leuk als je een berichtje schrijft, altijd leuk om te lezen, ook opbouwende kritiek!

Popular posts from this blog

How to sew a sleeveless top with facings

How lovely to read the nice comments on my jacket. Grumpy without coffee commented that the original artist for the cartoon (which apparently was for books) was Sarah Andersen. Thank you for mentioning it. Beckster asked about the way I closed the center back seam of the lining. I did it by machine. She also said “Although I have not tried it, I have been told that the lining can be made by using the pattern minus the seam allowance and facings.” Well, certainly not without seam allowances, it should be without hem and without the facings. Important is that you have about 5 cm hem in the jacket for this to work. And I would always make a center back pleat. It gives you space to move without the lining pulling on the fabric. Next time I make a jacket I will try to make photos of the process of bagging the lining (Patsijean said she would have liked to see them and probably more would be interested). Might take a while though, see the end of this post.-----------------------------I mad…

Hilarious description

This week I bought the January Burda issue and browsing through it this top, and especially its description had my attention. Written by someone who has no understanding of modern, functional fabrics and never goes to the gym. Don’t know whether it’s the same in the English issue of the magazine, but in Dutch it says “Sport shirts often have the disadvantage to be close fitted.  This restricts your movement. Our suggestion: make this shirt with a full draped back.“I didn’t care to check their description of sports shirts they published before, but thought this one was hilarious.Off to trace a pattern from this magazine (not this one).

Dress Burda June 2018, construction picture

Once in a while a pattern shows up in a magazine that I want to make immediately. This Burda dress from the June issue is one of those.It’s mainly the linedrawing that’s interesting, as the fabric they used for the magazine issue is not really showing the design lines. There would have been better accent options for the piping they uses. If you’re like me and in general don’t look at the Burda instructions but do it by experience or your way anyhow, DON’T go on autopilot with this one. Sleeveless dress: I close shoulder seams at the last possible moment. Not here, as you have to sew the bias band in between the center and side parts. The band has no seam (and I wouldn’t add one, too many layers of fabric), so the shoulder has to be sewn earlier than I’m used to.Darts: I was inclined to sew all darts as first step and realised really just in time that the front dart is taking up the edge of the band. Front and back band! I was stupified why the angle of the band was not matching the si…